38
$2,570.28
Wedge Lock Washers; Thread Size: 1/2; Material: Steel; Inside Diameter: 0.531 in; Outside Diameter: 0.768 in; Finish: Zinc Plated; Hardness: 465 HV Min; Standards: MIL-STD-1312-7 ISO 9001:2008 ISO TS16949; Thickness: 2.5 in DQUB962782588417
Quantity
$82.80
Quantity
$76.20
Ball Grip Quick-Release Pin: L-Handle, 1 Pin Dia, 1-1/4 Usable Length 3.41 OAL, 17-4 Stainless Steel, Stainless Steel Handle
Quantity
$78.60
Conveyor Accessories; Type: H Stand; Width (Inch): 23; For Use With: Ashland Conveyor 2-1/2 and 3-1/2 channel frames; Overall Height: 18.7500 in; Material: Steel; Overall Length (Inch): 8.00; Length: 8.00; Overall Length: 8.00; Accessory Type: H Stand;
Quantity
$75.90
Quantity
$90.50
Quantity
$67.20
Monolithic Pilot Light, Harmony XB7, Plastic, Green, 22mm, Integral LED, 24V AC/DC By Square D XB7EV03BP
Quantity
$12.00
Quantity
$100.00
Class XX Minus Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00000/-0.00002; Tolerance (mm): +0.00000/-0.00002; Diameter of Measurement (Decimal Inch): 0.5974; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability C
Quantity
$65.10
Ball Grip Quick-Release Pin: L-Handle, 1 Pin Dia, 1-1/2 Usable Length 3.66 OAL, 17-4 Stainless Steel, Stainless Steel Handle
Quantity
$78.60
Quantity
$20.00
Indexable High-Feed Face Mills; Minimum Cutting Diameter: 13.40 mm; Maximum Cutting Diameter: 22.00 mm; Maximum Depth Of Cut: 33.00 mm; Compatible Insert Size Code: 07; Maximum Ramping Angle: 0; Series: 78015; Cutter Style: PHC; Number of Cutter Inserts:
Quantity
$76.20
Quantity
$44.50
Quantity
$63.30
Quantity
$75.60
Automotive Shaft Seals; Seal Type: TF; Inside Diameter (Decimal Inch): 160; Outside Diameter (Decimal Inch): 180; Thickness (Decimal Inch): 10; Minimum Order Quantity: Fluoro Rubber; Material: Fluoro Rubber; Overall Thickness: 10; Inside Diameter: 160; Ma
Quantity
$79.20
Quantity
$99.00
Quantity
$65.10
Indexable High-Feed Face Mills; Minimum Cutting Diameter: 12.40 mm; Maximum Cutting Diameter: 21.00 mm; Maximum Depth Of Cut: 33.00 mm; Compatible Insert Size Code: 07; Maximum Ramping Angle: 0; Series: 78015; Cutter Style: PHC; Number of Cutter Inserts:
Quantity
$76.20
Quantity
$40.00
Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.5890; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
Quantity
$65.10
Quantity
$34.50
Wedge Lock Washers; Thread Size: 3/8; Material: Steel; Inside Diameter: 0.406 in; Outside Diameter: 0.827 in; Finish: Zinc Plated; Hardness: 465 HV Min; Standards: MIL-STD-1312-7 ISO 9001:2008 ISO TS16949; Thickness: 2.5 in DQUB962782585931
Quantity
$79.80
Quantity
$64.50
Replaceable Tip Milling Shank: Series 335.14, 12 Straight Shank M3.5 Neck Thread, 8 Neck Dia, Solid Carbide DQUB962782583252
Quantity
$86.10
Quantity
$0.79
