41
$2,712.17

Cart

Decora Wallplate, 3-Gang, Thermoset, Lt. Almond By Leviton 80411-T
Quantity
$0.80
Plug Thread Gage: M8x1 Thread, 6G Class, Double End, Go & No Go Handle Included
Quantity
$69.50
Plug Thread Gage: M18x2.5 Thread, 6H Class, Double End, Go & No Go Handle Included DQUB962782582965
Quantity
$69.50
Electronic Caliper: 0 to 6, 0.0005 Resolution, IP67 0.0010 Accuracy, Stainless Steel Caliper, 1.57 Jaw Length, Stainless Steel Jaws, Calibrated
Quantity
$75.60
Threaded Ring Gage: M39 x 1.50 Thread, Metric, Class 4H, Go
Quantity
$88.50
Square End Mill: 1'' Dia, 1-1/4'' LOC, 1'' Shank Dia, 5'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 Helix, Centercutting, RH Cut, RH Flute, Series 2012
Quantity
$75.90
SPC Data Transmitter For Use with Standard Caliper DQUB962782582816
Quantity
$75.60
Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.5460; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
Quantity
$98.50
Threaded Ring Gage: M39 x 2.00 Thread, Metric, Class 6H, No Go
Quantity
$88.50
Plug Thread Gage: M8x1 Thread, 4H Class, Double End, Go & No Go Handle Included
Quantity
$69.50
Mechanical Micrometer: 12 Range 0.001 Graduation
Quantity
$78.90
Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.5405; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
Quantity
$98.50
Brand: Seco / Part #: 10139368
Quantity
$96.50
1 AWG Aluminum Compression Sleeve By Ilsco ASN-1
Quantity
$12.79
High Leverage Diagonal Cutters By Knipex 74 02 200 SBA
Quantity
$26.00
Brand: Sandvik Coromant / Part #: 8251282
Quantity
$97.00
Roughing & Finishing End Mills; Mill Diameter (Decimal Inch): 0.7500; Mill Diameter (Inch): 3/4; End Type: Corner Radius; Corner Radius (Decimal Inch): 0.0300; Number of Flutes: 7; Material: Solid Carbide; Finish/Coating: AlTiN; Length of Cut (Inch): 1; S
Quantity
$79.50
Ball End Mill: 0.7874 Dia, 3.1496 LOC, 10 Flute, Solid Carbide ZrN Coated
Quantity
$76.20
Ball End Mill: 1 Dia, 2 Flute, Solid Carbide 5 OAL, 1 Shank Dia, 45 Helix, Uncoated, Single End, Series 2015
Quantity
$75.60
Corner Chamfer End Mill: 3 LOC, 6 Flute, 0.04 Chamfer Width, Cobalt 5-1/2 OAL, 1-1/4 Shank Dia, 35 Helix, Bright/Uncoated
Quantity
$78.60
Alligator Water Pump Pliers By Knipex 88 01 300 SBA
Quantity
$38.39
Raceway Blank End Fitting, 2400 Series, Steel, Ivory By Wiremold V2410B
Quantity
$0.80
Brand: Widia / Part #: 5472668
Quantity
$96.50
Cable Shears By Knipex 95 11 165 SBA
Quantity
$36.80
6 AWG Copper Compression Sleeve By Penn-Union BCU6
Quantity
$2.40
Robo Grip Pliers, Set of 2, (1) 7" & (1) 10" By Ideal 35-452
Quantity
$32.80
Supporting Clip, 3000 Series, Steel, Gray By Wiremold G3003
Quantity
$3.20
Brand: Ingersoll Cutting Tools / Part #: 5605829
Quantity
$100.00
3 AWG Copper Compression Sleeve By Ilsco CT-3
Quantity
$5.60
Compression Splice, Standard Barrel, 8 AWG By Thomas & Betts 54504
Quantity
$4.80
Raceway Entrance End Fitting, 2400 Series, Steel, Ivory, 1/2" KO By Wiremold V2410A
Quantity
$5.60
4-in-1 Electricians' Pliers 10-14 AWG By Knipex 13 01 614 SBA
Quantity
$27.00
Ball End Mill: 1 Dia, 3 Flute, Solid Carbide 4 OAL, 1 Shank Dia, 37 Helix, ZrN Coated, Single End, Series 1027 & Alumigator
Quantity
$76.50
Helical Flute Thread Mills; Material: Carbide; Thread Depth: 0.3870; Thread Type: Internal; Shank Type: Cylindrical; Thread Standard: UNF; Thread Mill Type: Long Reach; Flute Direction: Right Hand; Series: TC630; Number Of Flutes: 4
Quantity
$81.00
Long Nose Pliers with Cutter By Knipex 26 11 200 SBA
Quantity
$25.60
All-purpose Pliers By Klein J206-8C
Quantity
$31.99
Long Nose 40 Angled Pliers with Cutter By Knipex 26 21 200 SBA
Quantity
$38.40
Pipe Gripping Pliers-Replaceable Plastic Jaws By Knipex 81 11 250
Quantity
$43.50
Corner Radius End Mill: 1 Dia, 1-1/4 LOC, 1/4 Radius, 5 Flutes, Solid Carbide 4 OAL, 1 Shank Dia, 38 Helix, AlCr Coated, Corner Radius End, Series 2213
Quantity
$76.50
Ball End Mill: 1 Dia, 3 Flute, Solid Carbide 5 OAL, 1 Shank Dia, 37 Helix, Uncoated, Single End, Series 2045
Quantity
$75.60
Ball End Mill: 1 Dia, 4 Flute, Solid Carbide 3 OAL, 1 Shank Dia, 40 Helix, AlCromax Coated, Single End, Series 252
Quantity
$75.60
Payment Details
Sub Total $2,712.17

View cartCheckout

41
$2,712.17

Cart

Decora Wallplate, 3-Gang, Thermoset, Lt. Almond By Leviton 80411-T
Quantity
$0.80
Plug Thread Gage: M8x1 Thread, 6G Class, Double End, Go & No Go Handle Included
Quantity
$69.50
Plug Thread Gage: M18x2.5 Thread, 6H Class, Double End, Go & No Go Handle Included DQUB962782582965
Quantity
$69.50
Electronic Caliper: 0 to 6, 0.0005 Resolution, IP67 0.0010 Accuracy, Stainless Steel Caliper, 1.57 Jaw Length, Stainless Steel Jaws, Calibrated
Quantity
$75.60
Threaded Ring Gage: M39 x 1.50 Thread, Metric, Class 4H, Go
Quantity
$88.50
Square End Mill: 1'' Dia, 1-1/4'' LOC, 1'' Shank Dia, 5'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 Helix, Centercutting, RH Cut, RH Flute, Series 2012
Quantity
$75.90
SPC Data Transmitter For Use with Standard Caliper DQUB962782582816
Quantity
$75.60
Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.5460; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
Quantity
$98.50
Threaded Ring Gage: M39 x 2.00 Thread, Metric, Class 6H, No Go
Quantity
$88.50
Plug Thread Gage: M8x1 Thread, 4H Class, Double End, Go & No Go Handle Included
Quantity
$69.50
Mechanical Micrometer: 12 Range 0.001 Graduation
Quantity
$78.90
Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.5405; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
Quantity
$98.50
Brand: Seco / Part #: 10139368
Quantity
$96.50
1 AWG Aluminum Compression Sleeve By Ilsco ASN-1
Quantity
$12.79
High Leverage Diagonal Cutters By Knipex 74 02 200 SBA
Quantity
$26.00
Brand: Sandvik Coromant / Part #: 8251282
Quantity
$97.00
Roughing & Finishing End Mills; Mill Diameter (Decimal Inch): 0.7500; Mill Diameter (Inch): 3/4; End Type: Corner Radius; Corner Radius (Decimal Inch): 0.0300; Number of Flutes: 7; Material: Solid Carbide; Finish/Coating: AlTiN; Length of Cut (Inch): 1; S
Quantity
$79.50
Ball End Mill: 0.7874 Dia, 3.1496 LOC, 10 Flute, Solid Carbide ZrN Coated
Quantity
$76.20
Ball End Mill: 1 Dia, 2 Flute, Solid Carbide 5 OAL, 1 Shank Dia, 45 Helix, Uncoated, Single End, Series 2015
Quantity
$75.60
Corner Chamfer End Mill: 3 LOC, 6 Flute, 0.04 Chamfer Width, Cobalt 5-1/2 OAL, 1-1/4 Shank Dia, 35 Helix, Bright/Uncoated
Quantity
$78.60
Alligator Water Pump Pliers By Knipex 88 01 300 SBA
Quantity
$38.39
Raceway Blank End Fitting, 2400 Series, Steel, Ivory By Wiremold V2410B
Quantity
$0.80
Brand: Widia / Part #: 5472668
Quantity
$96.50
Cable Shears By Knipex 95 11 165 SBA
Quantity
$36.80
6 AWG Copper Compression Sleeve By Penn-Union BCU6
Quantity
$2.40
Robo Grip Pliers, Set of 2, (1) 7" & (1) 10" By Ideal 35-452
Quantity
$32.80
Supporting Clip, 3000 Series, Steel, Gray By Wiremold G3003
Quantity
$3.20
Brand: Ingersoll Cutting Tools / Part #: 5605829
Quantity
$100.00
3 AWG Copper Compression Sleeve By Ilsco CT-3
Quantity
$5.60
Compression Splice, Standard Barrel, 8 AWG By Thomas & Betts 54504
Quantity
$4.80
Raceway Entrance End Fitting, 2400 Series, Steel, Ivory, 1/2" KO By Wiremold V2410A
Quantity
$5.60
4-in-1 Electricians' Pliers 10-14 AWG By Knipex 13 01 614 SBA
Quantity
$27.00
Ball End Mill: 1 Dia, 3 Flute, Solid Carbide 4 OAL, 1 Shank Dia, 37 Helix, ZrN Coated, Single End, Series 1027 & Alumigator
Quantity
$76.50
Helical Flute Thread Mills; Material: Carbide; Thread Depth: 0.3870; Thread Type: Internal; Shank Type: Cylindrical; Thread Standard: UNF; Thread Mill Type: Long Reach; Flute Direction: Right Hand; Series: TC630; Number Of Flutes: 4
Quantity
$81.00
Long Nose Pliers with Cutter By Knipex 26 11 200 SBA
Quantity
$25.60
All-purpose Pliers By Klein J206-8C
Quantity
$31.99
Long Nose 40 Angled Pliers with Cutter By Knipex 26 21 200 SBA
Quantity
$38.40
Pipe Gripping Pliers-Replaceable Plastic Jaws By Knipex 81 11 250
Quantity
$43.50
Corner Radius End Mill: 1 Dia, 1-1/4 LOC, 1/4 Radius, 5 Flutes, Solid Carbide 4 OAL, 1 Shank Dia, 38 Helix, AlCr Coated, Corner Radius End, Series 2213
Quantity
$76.50
Ball End Mill: 1 Dia, 3 Flute, Solid Carbide 5 OAL, 1 Shank Dia, 37 Helix, Uncoated, Single End, Series 2045
Quantity
$75.60
Ball End Mill: 1 Dia, 4 Flute, Solid Carbide 3 OAL, 1 Shank Dia, 40 Helix, AlCromax Coated, Single End, Series 252
Quantity
$75.60
Payment Details
Sub Total $2,712.17

View cartCheckout

  • No categories
Sale

Decora Wallplate, 4-Gang, Nylon, White By Leviton 80412-NW

Original price was: $1.99.Current price is: $1.59.

(In Stock)

SKU: XC65910745 Category:

4-Gang, Decora/GFCI Device Decora Wallplate, Standard Size, Thermoplastic Nylon, Device Mount – White.

  • Mounting: Device
  • Size: Standard
  • Color: White
  • Gangs: 4
  • Material: Nylon

Reviews

There are no reviews yet.

Be the first to review “Decora Wallplate, 4-Gang, Nylon, White By Leviton 80412-NW”

Your email address will not be published. Required fields are marked *

Related products

41
$2,712.17

Cart

Decora Wallplate, 3-Gang, Thermoset, Lt. Almond By Leviton 80411-T
Quantity
$0.80
Plug Thread Gage: M8x1 Thread, 6G Class, Double End, Go & No Go Handle Included
Quantity
$69.50
Plug Thread Gage: M18x2.5 Thread, 6H Class, Double End, Go & No Go Handle Included DQUB962782582965
Quantity
$69.50
Electronic Caliper: 0 to 6, 0.0005 Resolution, IP67 0.0010 Accuracy, Stainless Steel Caliper, 1.57 Jaw Length, Stainless Steel Jaws, Calibrated
Quantity
$75.60
Threaded Ring Gage: M39 x 1.50 Thread, Metric, Class 4H, Go
Quantity
$88.50
Square End Mill: 1'' Dia, 1-1/4'' LOC, 1'' Shank Dia, 5'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 Helix, Centercutting, RH Cut, RH Flute, Series 2012
Quantity
$75.90
SPC Data Transmitter For Use with Standard Caliper DQUB962782582816
Quantity
$75.60
Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.5460; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
Quantity
$98.50
Threaded Ring Gage: M39 x 2.00 Thread, Metric, Class 6H, No Go
Quantity
$88.50
Plug Thread Gage: M8x1 Thread, 4H Class, Double End, Go & No Go Handle Included
Quantity
$69.50
Mechanical Micrometer: 12 Range 0.001 Graduation
Quantity
$78.90
Class XX Master Plug & Pin Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Tolerance (mm): +0.00001/-0.00001; Diameter of Measurement (Decimal Inch): 0.5405; Overall Length (Decimal Inch): 2.0000; Calibrated: No; Traceability
Quantity
$98.50
Brand: Seco / Part #: 10139368
Quantity
$96.50
1 AWG Aluminum Compression Sleeve By Ilsco ASN-1
Quantity
$12.79
High Leverage Diagonal Cutters By Knipex 74 02 200 SBA
Quantity
$26.00
Brand: Sandvik Coromant / Part #: 8251282
Quantity
$97.00
Roughing & Finishing End Mills; Mill Diameter (Decimal Inch): 0.7500; Mill Diameter (Inch): 3/4; End Type: Corner Radius; Corner Radius (Decimal Inch): 0.0300; Number of Flutes: 7; Material: Solid Carbide; Finish/Coating: AlTiN; Length of Cut (Inch): 1; S
Quantity
$79.50
Ball End Mill: 0.7874 Dia, 3.1496 LOC, 10 Flute, Solid Carbide ZrN Coated
Quantity
$76.20
Ball End Mill: 1 Dia, 2 Flute, Solid Carbide 5 OAL, 1 Shank Dia, 45 Helix, Uncoated, Single End, Series 2015
Quantity
$75.60
Corner Chamfer End Mill: 3 LOC, 6 Flute, 0.04 Chamfer Width, Cobalt 5-1/2 OAL, 1-1/4 Shank Dia, 35 Helix, Bright/Uncoated
Quantity
$78.60
Alligator Water Pump Pliers By Knipex 88 01 300 SBA
Quantity
$38.39
Raceway Blank End Fitting, 2400 Series, Steel, Ivory By Wiremold V2410B
Quantity
$0.80
Brand: Widia / Part #: 5472668
Quantity
$96.50
Cable Shears By Knipex 95 11 165 SBA
Quantity
$36.80
6 AWG Copper Compression Sleeve By Penn-Union BCU6
Quantity
$2.40
Robo Grip Pliers, Set of 2, (1) 7" & (1) 10" By Ideal 35-452
Quantity
$32.80
Supporting Clip, 3000 Series, Steel, Gray By Wiremold G3003
Quantity
$3.20
Brand: Ingersoll Cutting Tools / Part #: 5605829
Quantity
$100.00
3 AWG Copper Compression Sleeve By Ilsco CT-3
Quantity
$5.60
Compression Splice, Standard Barrel, 8 AWG By Thomas & Betts 54504
Quantity
$4.80
Raceway Entrance End Fitting, 2400 Series, Steel, Ivory, 1/2" KO By Wiremold V2410A
Quantity
$5.60
4-in-1 Electricians' Pliers 10-14 AWG By Knipex 13 01 614 SBA
Quantity
$27.00
Ball End Mill: 1 Dia, 3 Flute, Solid Carbide 4 OAL, 1 Shank Dia, 37 Helix, ZrN Coated, Single End, Series 1027 & Alumigator
Quantity
$76.50
Helical Flute Thread Mills; Material: Carbide; Thread Depth: 0.3870; Thread Type: Internal; Shank Type: Cylindrical; Thread Standard: UNF; Thread Mill Type: Long Reach; Flute Direction: Right Hand; Series: TC630; Number Of Flutes: 4
Quantity
$81.00
Long Nose Pliers with Cutter By Knipex 26 11 200 SBA
Quantity
$25.60
All-purpose Pliers By Klein J206-8C
Quantity
$31.99
Long Nose 40 Angled Pliers with Cutter By Knipex 26 21 200 SBA
Quantity
$38.40
Pipe Gripping Pliers-Replaceable Plastic Jaws By Knipex 81 11 250
Quantity
$43.50
Corner Radius End Mill: 1 Dia, 1-1/4 LOC, 1/4 Radius, 5 Flutes, Solid Carbide 4 OAL, 1 Shank Dia, 38 Helix, AlCr Coated, Corner Radius End, Series 2213
Quantity
$76.50
Ball End Mill: 1 Dia, 3 Flute, Solid Carbide 5 OAL, 1 Shank Dia, 37 Helix, Uncoated, Single End, Series 2045
Quantity
$75.60
Ball End Mill: 1 Dia, 4 Flute, Solid Carbide 3 OAL, 1 Shank Dia, 40 Helix, AlCromax Coated, Single End, Series 252
Quantity
$75.60
Payment Details
Sub Total $2,712.17

View cartCheckout